Residential Housing

Lund Road, Katikati 12/11/2026

Open plan lounge and kitchen island on new Revive XL Rotorua Oak laminate

Revive XL Laminate Over Tiles, Katikati

Liz and Paul's home in Katikati had grey ceramic tiles through the lounge, kitchen and hallway. They looked smart, but they were hard on the feet, cold in winter and made the whole space feel darker than it should.

They had already had a few quotes, and every one of them started with ripping the tiles out. That meant demolition, dust, a longer job and a bigger price tag.

We asked a simple question. Why do they need to come up? The tiles were solid and well bonded, so with the right prep and the right product there was no reason to tear them out. We floated Revive XL laminate in Rotorua Oak straight over the top, through the lounge, kitchen, hallway and laundry.

Scope of Works

  • Light grinding and levelling of the existing tiles where required
  • 2mm laminate underlay throughout
  • Supply and installation of Revive XL laminate in Rotorua Oak, approx. 61sqm
  • Laid over the existing tiles, no uplift or disposal needed
  • Skirting undercut so the floor sits neatly underneath
  • Floor run straight through into the laundry with no trim at the doorway
  • Colour matching trims where the new floor meets carpet and the remaining tiles
  • Site clean-up and final detailing

The result is warmer underfoot, softer to walk on and a home that feels twice as bright. As a thank you, we left Liz and Paul a Bona spray mop to keep their new floors looking their best, plus a box of cookies from HeavenLi.

Project Information

Client

Liz & Paul

Location

Katikati

Project Size

61sqm

Project Value

10 - 12k

Connect to Get Quote

admin@floorical.co.nz
07-9751037
Get A Quote
Before, the lounge with the original grey ceramic tiles during floor prep

What We Did

Before anything went down, we checked the tiles were sound and well bonded, then ground back any high spots and lips between tiles so the new floor would sit flat and true. Dust extraction ran the whole time to keep the home clean.

We laid a 2mm underlay over the prepared tiles and floated the Revive XL Rotorua Oak straight over the top. The skirting was undercut so the planks slide neatly underneath, with no scotia and no bulky trims along the walls.

The planks run continuously from the lounge through the kitchen and down the hallway, and carry on into the laundry with no trim at the doorway, so the house reads as one open space.

The install took four days, Monday to Thursday, and left Liz and Paul with a lighter, warmer home without the cost and mess of tile removal.

Challenges & Solutions

The main question on this job was whether the tiles had to come out. Removing them would have meant breaking up and disposing of every tile and grinding back the slab, adding days of dust and a fair bit of cost.

Because the tiles were sound, we kept them in place as the base. A little grinding took care of the uneven spots, and the floating floor went straight over.

Laying over tiles does add around 12mm of height. Where the new floor meets carpet, we packed the carpet edge so the step is barely noticeable, and where it meets the tiles that stay we used a colour matching ramp trim for a neat, safe transition.

It comes down to product knowledge and time on site. Knowing when something has to be done, and when it doesn't, saved Liz and Paul money without giving up anything on the finish.

After, the hallway in Revive XL Rotorua Oak laminate looking towards the kitchenThe front entry finished in Revive XL Rotorua Oak laminate

Contact Us Today for a Fast & Free Consultation

We transform homes with quality and care, ensuring every detail is handled with precision and craftsmanship.

Get A Fast Free Quote